|
Interior All Surface SuperCleaner
Cleans plastics, fabrics, carpets, leather, vinyl, stainess steel, finished wood and even high gloss polyurethane finishes
Will not damage paint, plastics, fabrics (including woolens), decorator fabrics, upholstery, finished leather or carpets
Safe and pleasant for users and the environment
Gentle, effective cleaning and leaves a pleasant fresh aroma
Safe to plastics, rubber and all metals
Completely biodegradable
Non-flammable and non-corrosive to all metals
Hard water stable, cold water efficient
Supplied in convenient concentrate for dilution with tap water to fit any need
Click here for a PDF Product Bulletin
 |
|
Nuvite C-49 SuperCleaner is the most versatile and effective cleaner you can buy when you want to clean fabrics, leather, carpet, plastics, laminates and even metals! -In other words, for cleaning all types of surfaces generally found in commercial & private aviation, building or institutional interiors, RV, truck and marine interiors, or even home interiors! It has a pleasant, clean smell and is safe for users and all your interior surfaces. Extremely easy to use, and is supplied in concentrate so dilution can be varied for a wide range of needs, -and without safety problems for users or materials.
Specifications:
Appearance: - clear light amber liquid
Flash Point - none
Odor: - mild citrus
pH - 9.7 to 9.9 @ 25 degrees C
Solubility: - Infinite in water
Specific Gravity: - 1.00 @ 25 degrees C
Availability:
Quart,1 & 5 Gallon or 55 Gallon Drums
Effects on Materials:
Nuvite C-49 SuperCleaner conforms to the requirements of
·Douglas CSD #1 · Boeing D6-17487 ·Boeing D6-1727
for safety to interior materials as well as bare and clad 2024, 7075, 2524 aluminum, cadmium plated steel, mild steel, high-strength steel, Plexiglas, and paint.
Health and Safety:
Users should follow good safety procedures, including wearing of gloves and goggles along with other standard safety procedures. Refer to C-49 Material Safety Data Sheet for further information.
Directions for Use:
Spot cleaning: Dilute Nuvite C-49 1:8 with water. Spray terry towel to dampen cloth, then apply to soiled spots. Soak out as much soil as possible into dry terry towel. If soil spot persists after soaking with towel, spray C-49 directly on spot and use soft brush to agitate up and down, then side to side. Reapply dry terry towel to soak out agitated residue. Repeat as needed. Finally, lightly spray around general area of spot, and work surface with up and down then side-to-side action with terry towel.
For broad areas: Dilute C-49 to 1:12. Clean soiled area with up/down, then side to side action with C-49 dampened terry towel. As surface becomes wet, switch to dry towel.
For leather: after cleaning very soiled areas with C-49, replace oils and surface condition with Nuvite Leather Guard.
Always use good ventilation, with eye and skin protection, especially when working beneath surfaces being cleaned. Refer to MSDS for health & safety information. Contact Nuvite representatives for further information and assistance.
|
