Nuvite Rid uses a sophisticated and extremely effective cleaning and removal action to eliminate the causes of odor and contamination of surfaces. It uses a dynamic surface activity to counteract the cause of both odors and unsanitary conditions.

In addition, Nuvite Rid uses a unique reodorizing element to either neutralize or add a mild, pleasant aroma to hard surfaces.

Nuvite Rid is specifically formulated for cleaning metals, plastics and other hard surfaces found in commercial food preparation areas, aircraft, bus, train and marine lavatories, and galleys as well as in home.

Even works great for cleaning pet keeping facilities & litter boxes!

Specifications:
Appearance: -clear blue liquid
Flash Point -none
Odor: -mild
pH -9.2 @ 25 degrees C
Solubility: -infinite in water
Specific Gravity: -1.00 @ 25 degrees C

Availability:
Quart,1 & 5 Gallon or 55 Gallon Drums

Precautions:
Do not mix Rid liquid with soap or anionic materials. The cationic detergent in Rid will become neutralized and effectiveness will be compromised. Do not allow Rid liquid to come in direct contact with food.
When using Nuvite materials, please refer to the appropriate procedures and recommendations for use and equipment, or consult with your Nuvite representatives.

Health and Safety:
Users should wear gloves and goggles along with other standard safety procedures. Refer to Rid Material Safety Data Sheet for further information.

Directions for Use:
Lavatory Cleaning: Use Rid diluted 1: 10-15 parts water. Wipe areas to be cleaned, or use trigger spray to spray areas and wipe dry with terry towel. Be sure to wet all areas thoroughly with diluted Rid liquid for best surface cleaning.

Grained plastic surfaces may be more effectively cleaned with the use of a soft brush, then wipe dry with terry towel. Do not allow Rid to overspray onto fabrics, as staining may occur.

Galley & Pet Area Cleaning: Use Rid diluted 1: 10 parts water. Use trigger spray to thoroughly wet all areas to be cleaned. Wipe dry with terry towel. For maximum action, allow two to three minutes contact time.

For floors: use mophead with diluted Rid liquid. Move equipment and mop beneath for best results. Allow two to three minutes contact time, then dry with clean dry mophead.

Do not allow Rid to contact fabrics or carpeting as staining may occur. Contact Nuvite representatives for further information/assistance.