Nuvite Leather Guard helps you keep that brand-new, supple, fine finished leather look and feel for luxury aircraft, RV or automotive seating, fine furniture or institutional use. Leather Guard is the finest enrichening formula available for leather nutrition . 

Cleaning, by necessity, removes oils that have to be replaced to maintain the surface and feel of the leather. Leather Guard lightly cleans while restoring these essential natural oils and conditions the surface after cleaning.

Also, it is the ideal finishing followup to a deep cleaning of seriously soiled leather with cleaners such as Nuvite C-49, so that nutrient oils are replaced and the problem of dry cracking of the surface is minimized.

Leather Guard can also be used to enhance appearance of all types of faux leather surfaces as well. Leaves premium leather look and feel (not shiny), and does not leave a slippery, glossy surface. Supplied ready to use (cream). 

Specifications:
Appearance: - tan, viscous liquid
Flash Point - none
Odor: - leather
pH - 8.7 to 9.2 @ 25 degrees C
Solubility: - dispersible
Specific Gravity: - .96 @ 25 degrees C

Availability:
Pint, Quart,1 & 5 Gallon or 55 Gallon Drums

Precautions:
Because LEATHER-GUARD is an emulsion, it is sensitive to extreme heat and freezing conditions. Avoid freezing. Store indoors. In addition, do not return any spent or unused material back into original container. Avoid eye contact. When not in use, keep container tightly closed.

Health and Safety:
Users should follow good safety procedures, including wearing of gloves and goggles along with other standard safety procedures. Refer to Leather Guard Material Safety Data Sheet for further information.

Directions for Use:
For heavily soiled leather, pre clean with Nuvite C-49 used at normal dilution of 1:12 with water. When dry, pour small amount of Leather Guard onto smooth cotton rag (T-shirt material -terry towels may cause streaking) folded into quarters. Apply uniformly over surface, spreading & working into surface as the area is covered.

After allowing a short time for drying, use a dry, clean cotton towel to polish leather surface to a soft luster.
Leather Guard replaces critical lost oils due to cleaning, and will help leather to resist cracking from over drying. Always use good ventilation, with eye and skin protection, especially when working beneath surfaces being cleaned. Refer to MSDS for health & safety information. Contact Nuvite representatives for further information and assistance.