Nuvite Regard is the finest and gentlest nutrient oil cleaner and fine wood conditioner available. The rich, finely-refined oils rejuvenate dried wood finishes and enrich the surface to reflect the finish, natural or applied.
Non-abrasive and effective as a cleaner of soil and dirt accumulation, Regard can also be used to help restore minor surface imperfections and maintain the reflectance on high gloss finishes, including polyurethanes, varnish, shellac and even laminates. In addition, it leaves a protective surface to resist hand oil, high humidity or overdryness.

Easy wipe on, rub in and polish off application.

Specifications:
Appearance: - off-white, viscous liquid
Flash Point - none
Odor: - mild perfume
pH - 8.2 to 8.4 @ 25 degrees C
Solubility: - dispersible in water
Specific Gravity: - 1.02 @ 25 degrees C

Availability:
Pint, Quart,1 & 5 Gallon or 55 Gallon Drums

Health and Safety:
Users should follow good safety procedures, including wearing of gloves and goggles along with other standard safety procedures. Refer to Regard Material Safety Data Sheet for further information.

Directions for Use:
For heavily soiled areas, Nuvite C-49 may be useful prior to use of Regard. Apply Regard with smooth cotton pad folded into quarters (T-shirt material -terry towels may cause streaking). Rub into surface. Extremely dry natural woods may benefit from additional applications. When surface shows rich natural glow, leave on the surface for a few minutes, then hand buff with clean dry terry towel.
High Gloss Finished Wood & Polyurethane Finishes: Apply Regard as above, rubbing into scratched or damaged areas as much as possible to help restore the finish shine. Allow to dry for a short time, then buff back to high gloss with clean dry terry towel. Always use good ventilation, with eye and skin protection, especially when working beneath surfaces being cleaned. Refer to MSDS for health & safety information. Contact Nuvite representatives for further information and assistance.