HomePage | Online Store |  Our History | Technical and Worldwide Reps | Nuvite Shine Forum |  Contact Us   

Aircraft Autos/Cycles/RV's/Trucks Marine Rail Industry Specials Promotional Items
PCS
Professional Carpet Spotter & Precleaner

Penetrates and removes tars, oil, soil and organic materials

Effective and unique cleaning action leaves no soapy or sticky residue

Biodegradable -safe and pleasant for users and the environment

Non-toxic to users

Retards re-soiling

Safe to plastics, rubber and all metals

Non-flammable and non-corrosive to all metals

Hard water stable, cold water efficient

Supplied in convenient concentrate for dilution with tap water to fit needs

Click here for a PDF Product Bulletin

Nuvite PCS is a concentrated power soil and stain spot remover for carpets. It will clean tars, oils, soil and organic materials from natural or synthetic carpets. And, Nuvite PCS is very effective as a pre-spotter prior to full carpet extraction treatment. It can also be used as primary cleaning fluid in rotary carpet cleaning machines. It helps you meet the toughest cleaning problems from carpets in all aircraft, RV, marine, auto and truck applications, and is extremely handy for use in institutional, commercial and home upkeep use.

Specifications:
Appearance: - pale amber liquid
Flash Point - none
Odor: - mild
pH - 9.2 to 9.6 @ 25 degrees C
Solubility: - infinite in water
Specific Gravity: - 1.00 @ 25 degrees C

Availability:
Quart,1 & 5 Gallon or 55 Gallon Drums

Effects on Materials:
Nuvite PCS Professional Carpet Spotter conforms to the requirements of
·Douglas CSD #1 · Boeing D6-17487 ·
for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium
plated steel, mild steel, high-strength steel, Plexiglas, and paint.

Health and Safety:
Users should wear gloves and goggles along with other standard safety procedures. Refer to PCS Material Safety Data Sheet for further information.

Directions for Use:
Spot cleaning: Dilute Nuvite PCS 1:4 to 1:8 with water. Test carpet for color fastness in inconspicuous area. After determining that carpet is color fast, spray terry towel to dampen cloth, then apply to soiled spots. Soak out as much soil as possible into dry terry towel.
If soil spot persists after soaking with towel, spray PCS directly on spot and use soft brush to agitate up and down, then side to side. Reapply dry terry towel to soak out agitated residue. Repeat as needed. Do not allow PCS to soak carpet backing. Follow with full carpet extraction prior to PCS drying if using as a pre-spotter.
Rotary Carpet Machine Application: Follow instructions on machine, using 1: 4 to 1: 9 dilution, depending upon soil. Lukewarm water may be used. Do not allow carpet backing to be soaked
Contact Nuvite representatives for further information/assistance.


Send mail to webmaster@nuvitechemical.com with questions or comments about this web site.