Nuvite NuImage is the answer to debugging and oil removal problems on your show-quality brightwork! NuImage will clean and debug your outstanding polish job without the fogging of normal cleaners, and will save you time and effort while it helps you maintain that famous “Nuvite Look” you get with Nuvite NuShine II metal polishes!

NuImage works great for cleaning polished skins on aircraft bellies and cowlings, removing oils and fluids without the “rainbow effect” that are usually left on the surface from oil residue.

And, it’s easy, too — put NuImage on a soft cotton flannel rag and apply, wetting bug spots, rubbing gently and spreading over the surface until clean. Continue over the surface, and when complete, final buff away the slight, dried haze to reveal the beautiful clear shine.

Nuvite NuImage even works great as a final cleanup for black metal polish residue on paint, and will help remove excess polish after power buffing.
NuImage: the ANSWER to polished metal cleaning & upkeep!

Specifications:
Appearance: - light blue cream
Flash Point - None
Odor: - mild
Solubility: - Dispersable
Specific Gravity: - 0.94 @ 25 degrees C

Availability:
8 oz., 16 oz., Quart, Gallon

Health and Safety:
Nuvite NuImage contains petroleum distillates. Users should follow standard good safety procedures, including wearing of gloves and goggles along with other standard safety procedures. Refer to NuImage Material Safety Data Sheet for further information.

Directions for Use:
Nuvite NuImage is intended for use as a cleaner for well-polished metals and paints. Use Nuvite NuShine II metal polishes to polish metals. To clean polished surfaces: pour a small amount of NuImage onto a soft cotton polishing cloth, and apply to surface. Wipe on gently to avoid mechanical scratching from surface soils and dust. Spread material over the whole polished area and gently spread, rubbing until NuImage is removed. A very slight haze will remain. Allow this haze to dry as you continue with the other areas to be cleaned. After haze has been allowed to dry completely, polish away to bright shine with a clean cotton flannel polishing cloth.

To remove stubborn bugs, put wet NuImage on bug spot and continue to spread material on the area around the bug while the wet NuImage soaks bug material. After a few seconds, rub away bug residue, or keep any remaining bug residue wet and soaking so that it can be removed with gentle rubbing. Continue going back over bug spot until gone.