Nuvite NuPower II is an extraordinary product for easy and effective care of painted or gelcoat surfaces on aircraft, boats and RV's. It will put a beautiful, slick, glossy surface on lightly oxidized paint or composite surfaces, and it will maintain a really supurb, glossy deep image finish on good paint and composite gelcoat surfaces.

Custom Planes magazine writer Ron Caraway tested NuPower II and gained seven mph and 50 rpm in his racing plane -he calls it "Speed in a Bottle!". (Custom Planes magazine - April 2004 issue)

It is easily applied with a wipe-on, wipe-off procedure using pad applicators or by hand, in all types of humidity conditions. NuPower II is a high technology formulation that offers a high gloss, cleaning power, and a protective barrier coating against surface oxidation that also protects against ultraviolet deterioration --especially important on marine, RV and aircraft composites!

Professional detailers also love NuPower II because it not only does a great job. it is so easy and fast to use, it offers them significant savings in labor.

NuPower II is especially valuable for appearance maintenance cost savings in fleet and heavy service situations. Whether it is industrial, liesure or just an individual owner's pride, Nuvite's NuPower II is "The Real Deal!"

Specifications:
Appearance: -tan, semi-viscous liquid
Odor: -mild
pH -10.6-10.8 @ 25 degrees C
Solubility: -dispersible in water
Specific Gravity: -0.961 @ 25 degrees C

Availability:
1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Effects on Materials:
Nuvite NuPower II conforms to the requirements of
·Douglas CSD #1 · Boeing D6-17487 ·AMS 1650
for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium
plated steel, mild steel, high-strength steel, Plexiglas, and paint.

Health and Safety:
Nuvite NuPower II contains petroleum distillates. Users should wear gloves and goggles as standard safety procedures. Refer to NuPower II Material Safety Data Sheet for further detailed information.

Directions for Use:
For Normal or Lightly Soiled Surface Conditions: Apply NuPower II “as is” by hand, spray or mophead to small areas at a time. Agitate area evenly with wet material, spreading thin. Allow to fully dry (usually no more than 5-15 minutes even in the highest humidity conditions). Remove by wiping with clean mophead or dry terry or similar towel to shine.

For Heavily Soiled Surface Conditions: For grease, oil, hydraulic oil buildup, it is recommended that the area be degreased with Nuvite Impact HD III, wiped down or wet washed with Nuvite CitriCut or SS 9-3 degreasing cleaners prior to the use of NuPower II, then proceed as above. Contact Nuvite representatives for further information and assistance.