Nuvite NuPol is the high-power drywash cleaner for those really tough situations - dull, dirt-catching oxidized paint, stained & oxidized gelcoat, baked-on thrust reverser “carbon rings”, turbine exhaust trails, and wherever you need to perform “appearance magic!”
Nuvite NuPol is easy to use. Just mop on with spun cotton scrub pad, agitate (more agitation removes more dirt and oxidation) to a thin layer and let dry. Then wipe off dry haze to reveal a clean, shiny and U/V-protected paint surface. Follow with Nuvite NuPower II for more gloss and protection.

NuPol frees up your time, shop manhours, manpower -and in commercial carrier maintenance operations, keeps aircraft movement down, with in-place cleaning during other maintenance procedures. NuPol requires no water or mess that interferes with other maintenance operations. Nuvite's NuPol can restore paint appearance and your heavy maintenance cleaning schedule at the same time!

Specifications:
Appearance: -lt. tan, semi-viscous liquid
Odor: -mild
pH -10.6-10.8 @ 25 degrees C
Solubility: -dispersible in water
Specific Gravity: -0.961 @ 25 degrees C

Availability:
1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Effects on Materials:
Nuvite NuPol conforms to the requirements of
· Douglas CSD #1 · Boeing D6-17487 · AMS 1650
for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium
plated steel, mild steel, high-strength steel, Plexiglas, and paint.

Health and Safety:
Nuvite NuPol contains petroleum distillates. Users should wear gloves and
goggles as standard safety procedures. Refer to NuPol Material Safety
Data Sheet for further detailed information.

Directions for Use:
For normal oxidation or seriously soiled surface conditions: Apply NuPol “as is” by hand, spun cotton pad, mophead or working quickly and lightly with slow speed orbital buffer to small areas at a time. Agitate area evenly with wet material to a thin layer.
Increased agitation will help cleaning/deoxidation action. Allow to fully dry (usually no more than 10-15 minutes). Remove by wiping off to a shine by hand with clean cotton mophead, dry terry towel or similar to shine. Use second application for severe surface soiling or deterioration.

For grease and heavily soiled surface conditions: For grease, oil, hydraulic oil buildup, it is recommended that the area be degreased with Nuvite Impact HD III or either wiped down or wet washed with Nuvite CitriCut or SS 9-3 degreasing cleaners prior to the use of NuPol to allow product to work without serious contamination, then proceed as above. Contact Nuvite representatives for further information and assistance.