Nuvite NuPol SS is the high-power drywash cleaner & finish restorer for those really tough situations –baked-on carbon exhaust, surface staining, dull, dirt-catching oxidized paint –just anywhere you need to perform “MAGIC”! Nuvite NuPol SS is easy to use –just wipe or mop on with spun cotton scrub pad, agitate to a thin layer, let dry. When you wipe off the dry haze you will see a clean, shiny and U/V-protected paint surface! No water, power tools to set up –and no mess - use it anywhere. Nuvite’s NuPol SS can beat the toughest paint appearance problems, and when used with other Nuvite paint care products, gives you the easiest and best paint care system you can get!

Specifications:
Appearance: -lt. tan, semi-viscous liquid
Odor: -mild
pH -10.6-10.8 @ 25 degrees C
Solubility: -dispersible in water
Specific Gravity: -0.961 @ 25 degrees C

Availability:
Quart, 1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Effects on Materials:
Nuvite NuPol SS has been proven superior in cleaning action and removing dead, oxidized paint without damage to underlying structures, windows or bright metal. However, it is not recommended for use on clearcoats, plastic trim, acrylic or polycarbonate lenses, or with high speed powered buffing tools unless tested prior to general use in an inconspicuous area of the vehicle.

Health and Safety:
Nuvite NuPol SS is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.

Directions for Use:
For Normal or Seriously Soiled Surface Conditions: Apply NuPol SS “as is” by hand with terry cloth, spun cotton pad, or mophead, working quickly and lightly with slow speed orbital buffer to small areas at a time. Agitate area evenly with wet material to a thin layer. Increased agitation will help cleaning/deoxidation action. Allow to fully dry (usually no more than 10-15 minutes). Remove by polishing off by hand with a fluff buff with a clean cotton mophead, dry terry towel or similar to shine. For maximum shine and finish protection, follow with Nuvite PowerPol II and GlazPFS.

For Heavily Soiled or Severely Dull Surface Conditions: For grease, oil, hydraulic oil buildup, it is recommended that the area be wiped down or wet washed with Nuvite CitriCut or SS 9-3 degreasing cleaners prior to the use of NuPol SS to allow product to work without serious contamination, then proceed as above. Severely Dull paint may require two or more applications with NuPol SS. Contact Nuvite representatives for further information and assistance.

When using Nuvite materials, please refer to the appropriate procedures and recommendations for use and equipment, or consult with Nuvite representatives for further information and demonstrations.