Nuvite introduces NuGlaze to create a super high gloss “show quality” finish for paint in new or excellent condition, and it adds a U/V and sealant protection . It will put that final “wet-look” finish on good paint, and can be used as a final step for maximum gloss after using a drywash cleaner/polish such as Nuvite NuPower II.

With regular NuGlaze use, a continuing surface barrier against most of the effects of airborne chemicals and ultraviolet radiation is created. Paint can be maintained in “new” condition longer and maintain the color balance intended by the manufacturer with regular use.

Bugs and normal soil remove easily from a NuGlaze surface, and the added gloss keeps the “new paint” look longer. NuGlaze is simple to use and avoids complicated setups and special application or buffing equipment.

Proven techniques and continuing technology advancement from Nuvite have come together to produce NuGlaze - the best thing you can do to maintain and protect your near-new or “new-looking” paint.

Specifications:
Appearance: -reddish tan liquid
Odor: -mild
pH -10.6-10.8 @ 25 degrees C
Solubility: -dispersible in water
Specific Gravity: -0.961 @ 25 degrees C

Availability:
1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Effects on Materials:
Nuvite NuGlaze conforms to the requirements of safety
to bare and clad 2024, 7075, 2524 aluminum, cadmium plated steel,
mild steel, high-strength steel, plexiglass, and paint.

Health and Safety:
Nuvite NuGlaze contains petroleum distillates. Users should wear gloves and goggles as standard safety procedures. Refer to NuGlaze Material Safety Data Sheet for further detailed information.

Directions for Use:
(NuGlaze is intended for new, clean surfaces. If paint has any oxidation or needs surface cleaning, Nuvite recommends the use of Nuvite CitriCut wetwash for pre cleaning or Nuvite NuPower II drywash cleaner prior to NuGlaze application.)

For clean, near-new or excellent condition surfaces: Apply NuGlaze “as-is” to clean terry or smooth cotton towel or to mophead. Wipe material evenly onto surface and agitate to ensure full coverage. Allow to fully dry on surface (usually no more than 5-20 minutes depending on humidity conditions). Remove by buffing out by hand with clean, cotton flannel, dry terry towel (turn cloth frequently) or mophead to shine.

For normal or lightly soiled or slightly “aged” surface conditions: Use Nuvite NuPower II drywash surface cleaner “as is” by hand, spray or mophead to small areas at a time (4 to 8 Sq. Ft.). Agitate area evenly with wet material. Allow to fully dry. Buff off by hand with clean, dry towel or with clean, dry mophead. Follow with NuGlaze as above for maximum finish gloss.