Nuvite SS-9-3 is the championship-caliber answer to the need for an effective and safe all-purpose wet wash cleaner. Dilute 1:20 in your wash water to make a great, non-streaking cleaner -and it helps prevent water spotting. It will also clean the toughest of underbelly grease, oils and fluid leakage if used at full strength, or SS9-3 can be diluted to 1:12 in a spray bottle to make an easy-to-use debugger and whole-airframe wipedown fluid that leaves a beautiful squeaky-clean and shiny surface that does not need to be rinsed.

SS 9-3 can't be beat for convenience when used as a wipedown and debugger because it can be used to clean RV's, trucks, autos, bikes, aircraft and marine in place without setup or creating a mess. Commercial aircraft can even be cleaned in the hangar during other airframe or engine maintenance! And, SS 9-3 can be used to simply, safely and easily clean interiors of cargo or utility aircraf t, as well. SS-9-3 is a superb product that offers great efficiency and economy due to wide usage capability and being supplied in high concentrate form. And, as a bonus, it is completely biodegradable and safe to use for operators.

Specifications:
Appearance: - clear, amber/yellow liquid
Flash Point - none
Odor: - mild
pH - 11.8-12.2 @ 25 degrees C
Solubility: - infinite in water
Specific Gravity: - 1.02 @ 25 degrees C

Availability:
1& 5 Gallon , 30, 55 Gallon Drums, Tank Wagon

Effects on Materials:
Nuvite SS-9-3 conforms to the requirements of
· Boeing D6-17487 · Douglas CSD #1 · AMS 1650
for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium plated steel, mild steel, high-strength steel, Plexiglass, and paint.

Health and Safety:
Nuvite SS-9-3 does not contain any toxic or restricted ingredients. Users should take standard safety precautions. Refer to SS-9-3 Material Safety Data Sheet for further detailed information.

Directions for Use:
For Normal or Lightly Soiled Surface Conditions - Hand Wipedown/ Debugging: mix 1:12 to 1:15 with water. Use trigger spray bottle and lightly spray area within reach. Use terry towel to wipe surface, turning towel often. Use a dry towel to buff to clean shine before moving to next area.

Wetwash: mix 1:12 to 1:20 in wash water depending upon soil conditions and frequency of maintenance schedule. Apply to aircraft by spray or mop, agitate to loosen soil, remove with water spray.

Interior Use (Cargo or other Utility aircraft): dilute 1:10, apply with mophead, agitate, remove with dry mophead or towels. No rinse necessary.
For Heavily Soiled Surface Conditions: For grease, oil, hydraulic oil or carbon buildup in gear, flaps and other difficult areas: Spray undiluted fluid into inaccessible areas, or mix 1:2 depending upon conditions. Allow to sit 15-20 minutes, rinse with water or pressure spray if needed.
When using Nuvite materials, please refer to the appropriate procedures and recommendations for use and equipment, or consult with your Nuvite
representatives for further information and demonstrations.