Nuvite NuGear Double Concentrate is a heavy-duty exterior cleaning compound for aircraft, trucks, stationary powerplants and other industrial applications. It has been specifically developed for spray wetwash applications, with superior wetting, penetration and dispersion of stubborn oil, grease & tough soil conditions commonly found on aircraft and diesel vehicles. NuGear Double Concentrate adds cleaning power over normal wet wash cleaners, and by varying the dilution, is also very versatile. It can even be used as a hand wipedown fluid for surfaces with oil, hydraulic fluid, and other petroleum-based soil such as found on the belly of an aircraft or truck trailers.

Specifications:
Appearance: -yellow, free-flowing liquid
Flash Point -none
Odor: -mild
pH (concentrate) -12.2-12.4 @ 25 degrees C
Solubility: -infinite in water
Specific Gravity: -1.04 @ 25 degrees C

Availability:
1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Effects on Materials:
Nuvite NuGear Double Concentrate conforms to the requirements of
·Douglas CSD #1 · Boeing D6-17487
for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium
plated steel, mild steel, high-strength steel, Plexiglas, and paint.

Health and Safety:
Nuvite NuGear Double Concentrate does not contain toxic or extremely hazardous ingredients, and is not environmentally restricted. Contains petroleum distillates. Users should wear gloves and goggles along with other standard safety procedures. Refer to NuGear Double Concentrate Material Safety Data Sheet for further information.

Directions for Use:
NuGear Double Concentrate is recommended for the periodic cleaning of exterior surfaces in dilutions determined by the extent, condition and type of soil to be removed.
For Normal Cleaning – Wet Wash: Dilute 6-10:1 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray, mop or foam application. Agitate to loosen soil and rinse with water. Hand Wipedown: Dilute 10-20:1, use trigger spray bottle and spray area within reach. Agitate with terry towel sprayed with the same solution. Wipe clean with dry terry towel.
For Heavy-Duty Cleaning/Gear, Wheel Wells, Flaps, Cowlings, Truck, Marine and Rail Applications: Use as-is concentrate or a 2:1 dilution depending upon soil conditions. Allow to soak 15-20 minutes. Agitate with mop or brush. Do not allow soaked area to completely dry. Rinse with water. Contact Nuvite representatives for further information and assistance.
When using any cleaning product, always use good ventilation, with eye and skin protection. Refer to appropriate MSDS for health & safety information. When using Nuvite materials, please refer to the appropriate procedures and recommendations for use and equipment, or consult with your Nuvite representatives.