Nuvite's citrus-based CitriCut provides a wide range of RV, truck, auto marine and airframe cleaning capabilities, yet, is both user and environmentally friendly. Nuvite's exclusive formulation gives exceptional cleaning capabilities and ease of use, whether wetwashing, cleaning by hand or even when used as a degreaser.

CitriCut can be used in a wide range of dilutions, such as for wetwashing at 1:20 dilution, or at 1:12 from a hand spray bottle for hand debugging without the need for an after rinse. The hand cleaning capability allows operations to be handled in place, parking place, in the maintenance bay or on the ramp.

When used for heavy cleanup/degreasing, such as wheel wells and bellies, CitriCut can be used at full concentrate strength by applying with a low pressure spray, let soak, and spray rinse clean with high pressure. All these capabilities come without worry of paint, acrylic or airframe damage, and it is safe for users and the environment. It smells good, too!
CitriCut is available in gel form to allow for vertical and overhead surface cling without fast runoff. (See CitriCut Gel)

Specifications:
Appearance: -orange, free-flowing liquid
Flash Point -none
Odor: -mild Citrus Orange
pH -11.8-12.2 @ 25 degrees C
Solubility: -infinite in water
Specific Gravity: -1.01 @ 25 degrees C

Availability:
1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Effects on Materials:
Nuvite CitriCut conforms to the requirements of
Douglas CSD #1 · Boeing D6-17487
for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium
plated steel, mild steel, high-strength steel, Plexiglas, and paint.

Health and Safety:
Users should wear gloves and goggles along with other standard safety procedures. Refer to CitriCut Material Safety Data Sheet for further information.

Directions for Use:
CitriCut is recommended for the periodic cleaning of exterior aircraft surfaces in dilutions determined by the extent, condition and type of soil to be removed.
For Normal Cleaning - Wet Wash: Dilute 1:12-1:20 with water, depending upon soil conditions and cleaning frequency. Apply to aircraft surfaces by spray, mop or foam application. Agitate to loosen soil and rinse with water. Wipedown/Debugging: Dilute 1:12-1:15:, use trigger spray bottle and spray area within reach. Agitate with terry towel sprayed with the same solution, repeat to remove heavy bug soil if necessary. Wipe dry with dry terry towel.
Heavy-Duty Cleaning/Gear, Wheel Wells, Flaps, Cowlings: Use full strength concentrate up to a 1:8 dilution depending upon soil conditions. Allow to soak 15-20 minutes. Do not allow soaked area to completely dry. Rinse with high pressure water. Contact Nuvite representatives for further information/assistance.
When using Nuvite materials, please refer to the appropriate procedures and recommendations for use and equipment, or consult with your Nuvite representatives.