Nuvite Eliminate is a technology-based method for lavatory system care and ongoing maintenance. Eliminate’s concentrated toilet tank flush/soak additive compound is specifically designed to break-up and disperse all hard-to-remove residues, i.e., paper and paper by-products, mineral scale, and any waste by-products commonly found in lavatory holding tanks. It is formulated to be safe to equipment and personnel while effectively dislodging and breaking down common lavatory sludge build-up within the system. In addition, Eliminate’s cleaning action will also service both on-board and ground-based internal pump mechanisms to maintain effectiveness and ease of operation for the long haul.
Eliminate is a liquid product that both users and ground-based facilities prefer over powders and fillers that can contribute to system sluggishness and potential clogging due to the instability of such powders. Eliminate users find it very cost effective while finding the process efficient, effective and extremely easy to use.

Specifications:
Appearance: -Dark brown, liquid
Flash Point - none
Odor -Mild Perfume
pH Approx. 11.8 - 12.2 @ 250C
Specific Gravity -1.02 @ 250C
Solubility -Completely soluble in water
Packaging: - Quart, Gallon, 5 Gallon, 15/20/30 or 55 Gallon Drums

Availability:
Quart, Gallon, 5 Gallon, 15/20/30 or 55 Gallon Drums

Effects on Materials:
Nuvite GoodBye-NF conforms to the requirements of
Boeing D6-17487 & AMS #1476 for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium plated steel, mild steel, high-strength steel, Plexiglas, and paint. 

Health and Safety:
Eliminate is not environmentally restricted and offers safety to the tritcherator and conformance to airport and  municipal waste disposal facilities.  Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information. 

Directions for Use:
When using any cleaning product, always use good ventilation, with eye and skin protection. Refer to appropriate MSDS for health & safety information. When using Nuvite materials, please refer to the appropriate procedures and recommendations for use and equipment, or consult with your Nuvite representatives.

1. Empty lavatory holding tank. Service with Nuvite ELIMINATE concentrate undiluted, as received. Allow up to several hours contact time for soaking. Flush all toilet compartments several times during process to re-distribute chemical contact and waste concentrations.
Note: If toilets are severely clogged or have not been routinely maintained, utilize an overnight soak procedure and flushing toilets several times during the process. Once routine cleaning soaks are established an Eliminate program may be used with a dilution strength of up to 3 parts water depending on the extent of residual buildups.
2. Remove waste contents from holding tank. For additional odor control and waste removal flush and drain holding tank with clean water.
3. Add mix solution of GoodBye-NF lavatory fluid at 1/2oz./gallon or 1:256 parts of water directly into waste tank. Flush all toilets to circulate for service ready status.