Nuvite Impact HD-III is the answer to your tough cleaning needs. It is especially effective for removing caked-on and extremely tough built up materials, and, it works in places where you need a really heavy duty cleaner and degreaser that will not adversely affect the systems and structure being cleaned. Nuvite Impact HD-III uses deep penetrating degreasing and gel-cling action to soften tar, asphalt, caked up grease and dirt, and it will clean burnt-on carbon deposits. It has superior corrosion control for all metals, including both steel and aluminum, and will not deteriorate rubber, acrylics, vinyls or paint.

In addition, Nuvite Impact HD-III is biodegradable, safe for users, and safe for the environment as well. It is non-flammable and non combustible and contains no restricted ingredients. It rinses away completely, so it can be used wherever it is needed.

Specifications:
Appearance: -orange, liquid/gel
Flash Point -none
Odor: -mild citrus
pH -11.7-11.9 @ 25 degrees C
Solubility: -dispersable
Specific Gravity: -.99 @ 25 degrees C

Availability:
1 & 5 Gallon or 15, 20, 30 and 55 Gallon Drums

Health and Safety:
NuShine II contains petroleum distillates Users should wear gloves and goggles along with other standard safety procedures. Refer to Material Safety Data Sheet for further information.

Directions for Use:
Impact HD-III is recommended for the periodic cleaning of exterior surfaces in either no dilution or in 1:2 dilution, to be determined by the extent, condition and type of soil to be removed.

For Heavy-Duty Cleaning Running Gear, Wheel Wells, and Aircraft Flaps, Cowlings: Use at full strength or dilute 1:2 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray or mop application. Agitate to loosen soil and rinse with water. Allow to soak, but do not allow to dry. Repeat agitation as needed to emulsify caked on material prior to pressure rinse.
Contact Nuvite representatives for further information and assistance.