Nuvite's citrus-based CitriCut provides a wide range of RV, truck, auto marine and airframe cleaning capabilities, yet, is both user and environmentally friendly. Nuvite's exclusive formulation gives exceptional cleaning capabilities and ease of use, whether wetwashing, cleaning by hand or even when used as a degreaser.

CitriCut can be used in a wide range of dilutions, such as for wetwashing at 1:20 dilution, or at 1:12 from a hand spray bottle for hand debugging without the need for and after rinse. The hand cleaning capability allows operations to be handled in place, parking place, in the maintenance bay or on the ramp.

Click for details.  

Nuvite's citrus-based CitriCut Gel wetwash uses it's fluid viscosity to cling to vertical and overhead surfaces, and it provides increased wet-out time and penetration of stubborn dirt or caked grease. CitriCut Gel extends Nuvite's extremely popular CitriCut formulation and its exceptional cleaning capabilities to even the most difficult situations. It also allows longer wet time for all surfaces even when used with water dilution. Water dilution may still be used if needed, or, for heavy cleanup, such as wheel wells and bellies.

Click for details.  

Nuvite SS-9-3 is the championship-caliber answer to the need for an effective and safe all-purpose wet wash cleaner. Dilute 1:20 in your wash water to make a great, non-streaking cleaner -and it helps prevent water spotting. It will also clean the toughest of underbelly grease, oils and fluid leakage if used at full strength, or SS9-3 can be diluted to 1:12 in a spray bottle to make an easy-to-use debugger and whole-airframe wipedown fluid that leaves a beautiful squeaky-clean and shiny surface that does not need to be rinsed.

Click for details.  

Nuvite Impact HD-III is the answer to your tough cleaning needs. It is especially effective for removing caked-on and extremely tough built up materials, and, it works in places where you need a really heavy duty cleaner and degreaser that will not adversely affect the systems and structure being cleaned.

Nuvite Impact HD-III uses deep penetrating degreasing and gel-cling action to soften tar, asphalt, caked up grease and dirt, and it will clean burnt-on carbon deposits. It has superior corrosion control for all metals, including both steel and aluminum, and will not deteriorate
rubber, acrylics, vinyls or paint.

Click for details.  

Nuvite NuGear SC is a heavy-duty aqueous cleaning compound for aircraft engine and component degreasing operations. NuGear SC can be used for hand cleaning as well as in hot immersion tanks and spray cabinets. It has been specifically developed for superior wetting &, penetration and has been reformulated from Nuvite NuGear Double Concentrate for engine shop operations and does not contain petroleum distillates. It will provide safe and effective cleaning at economical cost while conforming to stringent water, air and environmental regulations. Nuvite NuGear SC has specific approvals for use by Pratt & Whitney, Rolls Royce and General Electric for engine overhaul operations.

Click for details.  

Nuvite NuGear Double Concentrate is a heavy-duty exterior cleaning compound for aircraft, trucks, stationary powerplants and other industrial applications. It has been specifically developed for spray wetwash applications, with superior wetting, penetration and dispersion of stubborn oil, grease & tough soil conditions commonly found on aircraft and diesel vehicles. NuGear Double Concentrate adds cleaning power over normal wet wash cleaners, and by varying the dilution, is also very versatile. It can even be used as a hand wipedown fluid for surfaces with oil, hydraulic fluid, and other petroleum-based soil such as found on the belly of an aircraft or truck trailers.

Click for details.