Graded Metal and Paint Polish

Exceptional Surface Polish, With Oxidation and Corrosion Removal Imparts Extreme Image Clarity to Aluminum, Brass, Copper, Steel, etc. Easy and Economical to Use Safe to All Aircraft Component Parts Removes Spots, Stains, Cloudy “Undercast” and Orange Peel Grades from Heavy Cut to Final Finish Preserves and Protects Substrate From Further Oxidation Extreme economy through very low material use and time reduction

Click here for F9 TDB

NuShine II Grade F9 –F9 is used where the surface has been damaged by stripping processes, sanded or scratched by abrasive cloth.  Ask your Nuvite representative for specific recommendations, but never use standard sanding papers –even wet.  There are specialty micro fine surface sanding materials (specialty grade abrasives –not commercial grade sandpapers) that may be helpful in really severe situations prior to using F9.  But F9 is a good surface blender and is useful even for non-clad aluminum, harder alloys and anodized surfaces needing special procedures to "heal the surface" before moving on to grade G6 or C for further surface preparation.

Generally, the polishing step with the NuShine II F9 is used to uniform a rough surface, remove pitting, corrosion and prep for an Intermediate step that further reduces any strike marks or scuff marks that develop during leveling to a uniform surface that can be buffed.

Availability:

NuShine II Grades: NuShine II - S Final Finish -For the "Nuvite Look", Light Oxidation Removal, Polish Upkeep & Repolishing, Paint Finishing NuShine II - A Light Oxidation Removal, Polish Surface Reconditioning NuShine II - C Repolishing prep of already polished metal, Removal of Cloudy Look, Oxidation Removal NuShine II - G6 “Smart Abrasive” - Quick Cut, Reduces to Fine Finish For Initial Polish of New Metals to Prep for Final Finish NuShine II - F7 Removing Light Corrosion, Blending Scratches & Pitting NuShine II - F9 Removing Serious Corrosion, Surface Blemishes, & Repairing Abrasive Pad Scratching in all metals. Also recommended for Prep of Non-Clad Aluminum Surfaces. * Specialty grades are available beyond those listed - Contact Nuvite for Information.

NuShine II Recommended Procedures

Using a Compound Polisher

Using an Orbital Buffer